CrunchYourDollars

Heating cost, Kentucky

What It Costs to Heat a Home in Kentucky This Winter (2026-27)

Short answer: heating a typical 2,000 sq ft home in Kentucky costs about $793 a year with the cheapest option, a natural gas furnace, and about $2,730 with the most expensive, a heating oil boiler. Heating oil runs $2,730 and propane $1,763.

By Marcus Reed. Updated Nov 3, 2026. Part of our heating cost by state study.

Yearly heating cost in Kentucky, by system

SystemKentucky a yearUS averageFuel used
Natural gas furnaceCheapest95% AFUE$793$831577 therms
Air-source heat pump8.1 HSPF2$896$1,1386,770 kWh
Propane furnace95% AFUE$1,763$1,631631 gallons
Electric resistance100%$2,128$2,70216,071 kWh
Heating oil boiler85% AFUE$2,730$2,788466 gallons

Estimates for one reference home: 2,000 sq ft, average insulation, a normal winter. Equipment, maintenance, fan and pump electricity and tank rental are not included.

How Kentucky compares

Kentucky ranks 34th most expensive of 50 places with a real heating season when each uses its cheapest option, and 35th for a gas furnace. Its gas figure of $793 is 5% below the US average of $831.

The climate explains part of it. Kentucky averages 4,352 heating degree days a year (1991-2020 normal, weighted by where people live), 1.0 times the contiguous US figure of 4,230, so the same house needs 54.8 million BTU of heat a winter against 53.3 nationally. The rest is prices: electricity at 13.2 cents per kWh against a US average of 17.3, and the fuel prices below.

Is a heat pump worth it in Kentucky?

On running cost alone, an air-source heat pump costs $896 a year here. That is $1,834 a year less than heating oil, $867 less than propane and $1,232 less than electric baseboards. A gas furnace is still $103 a year cheaper where gas service is available.

Sizing decides whether a heat pump keeps up. Use our central heat pump size calculator for a ducted house or the mini-split calculator room by room.

Prices used for Kentucky

Electricity
13.2 cents per kWh
EIA 2025 state average
Natural gas
$1.37 per therm
EIA state average
Propane
$2.79 per gallon
EIA October 2026, state average
Heating oil
$5.86 per gallon
EIA October 2026, state average

Where the EIA does not publish a Kentucky figure, we use its regional or US average and say so above. The full method and sources are in the main study.

Lowering the bill

  • A setback schedule on a smart thermostat trims heating energy by about 8% by ENERGY STAR's estimate, about $63 a year on the natural gas furnace figure here.
  • A space heater only saves money if the rest of the house is allowed to cool. At 13.2 cents per kWh a 1,500 W heater costs about $0.20 for each hour it runs on high; see what a space heater costs to run.
  • Air sealing and attic insulation lower every number on this page in proportion, because they cut the heat the house needs.

Kentucky heating cost FAQ

How much does it cost to heat a house in Kentucky?

For a 2,000 sq ft home with average insulation in a normal Kentucky winter: $793 with a natural gas furnace, $896 with an air-source heat pump, $1,763 with a propane furnace, $2,128 with electric resistance heat, $2,730 with a heating oil boiler. That uses EIA prices for Kentucky and its 1991-2020 normal of 4,352 heating degree days.

What is the cheapest way to heat a home in Kentucky?

A natural gas furnace, at about $793 a year for our reference home. The next cheapest is an air-source heat pump at $896, and the most expensive is a heating oil boiler at $2,730. If you have no gas line, the choice is usually between a heat pump, propane and oil.

Is a heat pump cheaper than oil or propane in Kentucky?

Yes against oil: about $1,834 a year less. Against propane it saves about $867 a year. That uses a 8.1 HSPF2 heat pump.

How much heating oil or propane does a house in Kentucky use in a winter?

Our 2,000 sq ft reference home needs about 466 gallons of heating oil in an 85% efficient boiler, or 631 gallons of propane in a 95% furnace, in a normal Kentucky winter. Smaller or tighter homes use less; a cold winter uses more in proportion.

Marcus Reed

Founder and Editor, CrunchYourDollars

Marcus Reed builds the sizing tools on CrunchYourDollars. He is a software engineer with a long-running PC hardware and power supply habit, which is where the watts, watt-hours and surge math on this site comes from. Product specs are pulled from manufacturer data sheets, electricity rates from the U.S. Energy Information Administration, and water chemistry rules from the Water Quality Association. He is not a licensed electrician or plumber: the tools show the math and the matching models so you can make the call, and anything involving your electrical panel should be checked by a licensed pro.

More about CrunchYourDollars and how we research